Midea MDF18A1AWW User Manual page 27

PROBLEM POSSIBLE CAUSE
●
Stained tub
Coffee and tea soil.
●
interior Reddish stain.
●
Noises Detergent cup opening\
Drain pump sound.
●
A hard object has entered
the wash module. When
the object is ground up,
the sound should stop.
●
Dishwasher Water valve is turn off
●
Door latch may not be
won't fill with
properly seated
water
Error Codes
Error codes will display on the display window when the following errors
occur:
Code Meanings
E1
Not enough water flow in
allotted time
E4
Overflow or leak sensor
activated
WARNING
●
If overflow occurs, turn off the main water supply before calling a
service provider.
●
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
SOLUTION
●
Using an approved spot
cleaner to remove the soil.
●
Some tomato-based foods
will cause this, use of the
rinse only cycle right after
loading this will decrease the
staining.
●
This is normal.
●
If the noise persists after
a complete cycle, call for
service.
●
Check if the water valve is
turn on
●
Make sure the door is closed
Cause
Confirm water is turned on to
the dishwasher. Verify water
pressure.
NOTE: Water supply must
maintain water pressure between
20 and 80 psi for sufficient flow.
First, turn off water to the
dishwasher. Check filter system
for blockage.
IMPORTANT: Watch for broken
glass in the filter. If there is
no water in the tub, contact
Customer Service.
27