Safety Information IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE), Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE THESE INSTRUCTIONS – To reduce the risk of fire, electric shock, or injury: •...
Page 33
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of • To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only Dreame Trading (Tianjin) Co., Ltd.
Page 34
Safety Information Grounding Instructions...
Product Overview Product Overview Package Contents Robot Spot Cleaning Button · Press to start spot cleaning Other Accessories Power / Clean Button · Press to start cleaning after the robot is turned on Dock Button Robot · Press to send the robot back to the base station ·...
Product Overview Product Overview Robot and Sensors Base Station Status Indicator Solid white: The base station is connected to power Solid Orange: The base station Upper Cover Carpet Sensor has an error Omnidirectional Microphone Wheel Side Brush LDS Cover Used Water Tank Clean Water Tank Brush Guard Main Brush...
Preparing Your Home Before Use 1. Remove the Protections 3. Connect to an Electrical Outlet Place the base station in a location that is as open as possible with a good Wi- Fi signal. Then insert the power cord into the base station and plug it into the socket.
Page 38
Before Use Connecting with the Dreamehome App 5. Place the Robot 1. Download the Dreamehome App 2. Add Device Scan the QR code on the robot, or search "Dreamehome" in the app store to Open the Dreamehome app, tap " " in the upper right corner, and scan the Press and hold the button on the robot for 3 seconds to turn it on.
How to Use How to Use Fast Mapping Auto Resume Cleaning Vacuum and Mop 2. Auto mop washing When cleaning, the robot will automatically return to the base station to wash Note: When using the mop assembly for the first time, the robot performs the After configuring the network for the first time, follow the instructions on If the battery is too low, the robot will automatically return to the base mop pads based on the mop pad cleaning frequency specified in the app.
How to Use Routine Maintenance Vacuum then Mop Parts 3. Automatically empty the dust box and wash and dry the mop pads after finishing the "Vacuum and Mop" task Select "Vacuum then Mop" in the app, and the robot will automatically lift the To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
Page 41
Routine Maintenance Routine Maintenance Base Station Cleaning Dust Bag 3. Install a new dust bag. 1. Discard the dust bag. 1. Select "Base Station Cleaning" in the app, and the robot will exit the base 3. After a moment, the base station will automatically pump out the used station automatically.
Routine Maintenance Routine Maintenance Used Water Tank Main Brush Side Brush Dust Box and Filter 1. Remove the used water tank, open its cover and pour out the used water. 1. Press the brush guard clips inwards to remove the brush guard and lift the Remove and clean the side brush.
Page 43
Routine Maintenance Routine Maintenance Robot Sensors and Charging Contacts Charging Contacts Mop Pad Wipe sensors and charging contacts of the robot by using a soft and dry Clean the charging contacts and the signaling area of the base station with Remove the mop pad from the mop pad holder to replace it.
Troubleshooting Troubleshooting Problem Solution Problem Solution The battery is low. Recharge the robot on the base and try again. press and hold the button The robot will not turn on. The temperature of the battery is too low or too high. It is recommended to operate the appliance at a temperature between 32°F (0°C) and 104°F (40°C).
Troubleshooting Specifications Robot Base Station Problem Solution Model RLL82CE Model RCLE0301 Make sure that the robot is not set to the Do Not Disturb (DND) mode, which will prevent it from resuming cleaning. The robot will not resume The robot will not resume cleaning after you manually return the robot to the base station to charge, which includes cleaning after charging.
Battery Disposal and Removal The built-in lithium-ion battery contains substances that are hazardous to the environment. Before disposing of the battery, make sure the battery is removed by qualified technicians and discarded at an appropriate recycling facility. – the battery must be removed from the appliance before it is scrapped; –...
Need help?
Do you have a question about the DreameBot L10s Pro Ultra and is the answer not in the manual?
Questions and answers