4.2
Compile and Execute the demo
In this example, no ICP DAS modules are used. To create a demo program with C language that
includes the following main steps:
Step
Find demo 'helloworld.c' in SDK
1.
Here is in the "lp8421_imx8mm_sdk/examples/common/helloworld.c"
Compile the demo on LP-2841M directly
2.
# make
Execute the application
3.
# ./helloworld
Note:
1) We recommend user to change user ID to become
2) Linux 64-bit operating system lacks 32-bit support libraries. If your Linux PC is 64-bit OS, you
must install 32-bit libraries on your system before you run the 32-bit version of the LinPAC SDK
(Linux version).
LinPAC-2841 Series User Manual
LP-2841M
root
by 'sudo' or 'su' command.
Version 1.0
page: 25