Advertisement
5.3.3 Configuring the external alarm
Navigation:
Service menu
The External alarm menu allows the user to configure the settings associated with the
external alarm input, i.e., its behavior and the actions that are triggered when it switches.
Ext. alarm config.
[addressing selection]
Alternate name
[name set]
Latching mode
[Latching/Non-latching]
Siren addressing
[Addressed/Non-addressed]
Normal state
[
Normally closed/Normally open
The external alarm status must be enabled to display the other items in the Ext. alarm
menu, except for the Normal state item. Normal state can be configured before enabling
the external alarm to avoid false alarms.
a) Configuration of the external alarm
The external alarm can have the following configurations:
▪
Disabled: a status change on the input will not have any effect
▪
Set alarm level 1: a status change on the input will trigger alarm level 1
▪
Set alarm level 2: a status change on the input will trigger alarm level 2
▪
Set alarm levels 1&2: a status change on the input will trigger alarm levels 1&2
b) External alarm alternate name
An alternate name allows to give a specific name to the external alarm, so that it can be
displayed on the screen in the event of an alarm is triggered.
DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
Configuration menu
→
]
Ext. alarm config.
Disabled
External alarm
Fire alarm
U•H1 Instruction Manual
32
External alarm menu
→
Content
Addressing of the external alarm input
Allows the user to view the name given to the
external alarm
Latching mode for the external alarm
Configuration of the addressing of the siren that is
potentially associated with the external alarm
Normal status of the external alarm input
|
50
Certified
ISO9001 • VCA
www.dalemans.com
Advertisement
