Advertisement
The U•H1 unit asks for confirmation of the detected configuration:
Once the user has confirmed this by pressing ENTER, the detected configuration is loaded
into the U•H1 unit. It is now operational. The user can cancel the modification and return to
the info menu by pressing ESC.
5.3.2 Configuring the measurement channel
Once a measurement channel has been selected, the Channels setting allows the user to do
the following:
▪
assign a location to the detector.
▪
set the detector offline.
a) Setting a detector location
Navigation:
Service menu
The location in the U•H1 unit allows the user to identify the detector that is connected.
The user may assign a location to a detector in two ways:
▪
Preset Location
▪
Custom Location
These two methods may be combined by customizing a location that has previously been
chosen from the list of preset locations.
i) Preset locations
The U•H1 unit proposes a list of preset locations. This is available in three languages
(English, Dutch and French). For details of the list, see Annex D: Predefined locations
The user selects the location from the list using the Up and Down arrow keys.
When the title of the location allows it (display is limited to 20 characters), an index from 1 to
9 may be added using the Right and Left arrow keys. Depending on the item selected, it
may also be possible to select other variants. See Annex D: Characters available for text
edition
The user confirms their choice of location by pressing ENTER.
The user may interrupt and cancel their choice of location by pressing ESC.
DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
New sensor config.?
*
Configuration set
Configuration menu
→
U•H1 Instruction Manual
Channel setting
→
30
|
50
Channel location
→
Certified
ISO9001 • VCA
www.dalemans.com
Advertisement
