3.3 Factory configuration
The U•H1 control unit comprises a factory configuration which can be adapted based on the
installation in question.
By default, the U•H1 control unit is configured as follows:
Channel #
Channel 1
Where:
▪
A1 = alarm level 1, set on 20%LEL by default
▪
A2 = alarm level 1, set on 40%LEL by default
▪
SO = siren output
▪
F = Fault relay
▪
Rx = Alarm relay x
▪
AR = Alarm repeater
▪
= the alarm level from the selected row is mapped to the relay/output from the
selected column
▪
S = the alarm level from the selected row is mapped to the relay/output from the
selected column in siren mode
For more information about all the standard configurations available, please contact
DALEMANS sa/nv.
DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
Default Config.
Measurement
range
0 -> 100% LEL
U•H1 Instruction Manual
F
R1
R2
R3
FAULT
A1
S
A2
17
|
50
SO
S
Certified
ISO9001 • VCA
www.dalemans.com