Advertisement
The possibilities are as follows:
▪
'Immediate': (no delay, the output is activated after confirmation)
▪
'1 min'
▪
'2 min'
▪
'3 min'
▪
'5 min'
▪
'10 min'
▪
'15 min'
The user can confirm their selection by pressing ENTER.
In a third step, the control unit offers to select an adjustable duration for which the target
output will be activated for.
The possibilities are as follows:
▪
'5s'
▪
'15s'
▪
'30s'
▪
'1 min'
▪
'5 min'
▪
'15 min'
The system then asks for confirmation before switching the output.
The user can confirm the activation of the selected output by pressing ENTER. It is then
activated, along with the equipment that is connected to it.
The output remains activated for the duration of the output test.
This test ends:
▪
upon manual action by user (pressing the ESC key).
▪
when the maximum activation time for the output (15 minutes) has expired.
The user may interrupt and cancel the Output Test function at any time by pressing ESC
key. The test sub-menu is then re-enabled and displays the output test function.
DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
Select delay
3 min
Select duration
5 s
General fault relay
Ready to activate?
General fault relay
Activated
U•H1 Instruction Manual
28
|
50
Certified
ISO9001 • VCA
www.dalemans.com
Advertisement
