3onedata ICS5400 PTP Series Quick Installation Manual

ICS5400 PTP Series
Layer 3 PTP Industrial Ethernet
Switch
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park,
Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485

【Package Checklist】

Please check the integrity of package and accessories while
first using the switch.
1. Switch ×1 2.
3. AC power line ×2 4.
5. Certificate
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.

【Product Overview】

This series of products are rack-mounted layer 3 PTP
industrial Ethernet switches. Models as follows:
Model I. ICS5400PTP-12GT16GS4XS-2HV
copper ports + 16 Gigabit SFP slots + 4 10G SFP+
slots, 85~264VAC redundant power supply)
Model II. ICS5400PTP-24GT16GS4XS-2HV

【Panel Design】

Front view

Rear View

1.
Xili, Nanshan District,
2.
3.
4.
5.
6.
7.
Mounting lug x2
Warranty card
8.
9.
10.

【Mounting Dimension】

Unit: mm
(12 Gigabit
copper ports + 16 Gigabit SFP slots + 4 10G SFP+
slots, 85~264VAC redundant power supply)
Model I
Model II
Lugs
Relay alarm output interface
100/1000Base-X Gigabit SFP slot (GS 1-16)
10/100/1000Base-T(X) Gigabit copper port (GE
17-28/40)
1G/2.5G/10GBase-X 10Gigabit SFP+ slot (XS 1-4)
CONSOLE port
Device indicators, from left to right in turn they are:
- Ethernet port indicator (G1-G28/40, X1-X4)
- Power indicator (P2-P1)
- Alarm indicator (ALM)
- Running indicator (RUN)
AC power 2 input socket (PWR2)
Grounding screw (M4)
AC power 1 input socket (PWR1)
(24 Gigabit
Notice Before Mounting:
Don't place or install the device in area near water or

moisture, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before powering on the device, check the power

Specifications supported by the device to prevent device
damage due to overvoltage.
The device surface temperature is high after running;

please don't directly contact to avoid scalding.

【Rack-mounting】

This product adopts 1U rack-mounting, mounting steps as
below:
Select the device mounting location to ensure
enough size.
Adopt 4 bolts to install the mounting lugs in the
device position as figure below.