Page 1
When attaching the crank, thread the crank onto crankshaft by turning the hex nut clockwise two revolutions. It is not necessary to tighten, the crank will tighten itself as you use it. Your Earthway 2750 is now ready for use! RATE SETTINGS Field Seed Type...
Page 2
Assembly and Operation Instructions OPERATING INSTRUCTIONS Before filling the bag, become familiar with the operation of your spreader. Obtain proper setting for material to be used from the rate-setting chart found in this manual or on the underside of the unit.
Page 3
If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, improper storage, or normal wear and tear as determined by EarthWay.