Table Of Contents - GEA HG22e A Assembly Instructions Manual

Contents
1 Safety
1.1 Identification of safety instructions
1.2 Qualifications required of personnel
1.3 General safety instructions
1.4 Intended use
2 Product description
2.1 Short description
2.2 Name plate
2.3 Type key
3 Areas of application
3.1 Refrigerants
3.2 Oil charge
3.3 Limits of application
4 Compressor assembly
4.1 Storage and transport
4.2 Setting up
4.3 Maximum permissible inclination
4.4 Pipe connections
4.5 Pipes
4.6 Laying suction and discharge lines
4.7 Operating the shut-off valves
4.8 Operating mode of the lockable service connections
5 Electrical connection
5.1 Information for contactor and motor contactor selection
5.2 Connection of the driving motor
5.3 Circuit diagram
5.4 Electronic trigger unit MP 10
5.5 Connection of the electronic trigger unit MP 10
5.6 Externer Anschluß MP 10 bei Klemmkasten in reduzierter Bauhöhe
5.7 Functional test of the electronic trigger unit MP 10
6 Commissioning
6.1 Preparations for start-up
6.2 Pressure strength test
6.3 Leak test
6.4 Evacuation
6.5 Refrigerant charge
6.6 Start-up
6.7 Avoiding slugging
7 Maintenance
7.1 Preparation
7.2 Work to be carried out
7.3 Spare parts recommendation
7.4 Accessories
7.5 Extract from the lubricants table
7.6 Decommissioning
8 Technical data
9 Dimensions and connections
10 Declaration of installation
11 Service
Page
4
6
8
10
D
14
GB
F
E
20
22
24
25
26
27
3