Accessories; Extract From The Lubricants Table; Decommissioning - GEA HG5/725-4 Assembly Instructions Manual

Table of Contents

Advertisement

7| Maintenance
7.3 Recommended spare parts
HG5 / ...
Designation
Set of gaskets
Valve plate kit
Oil pump kit
Oil sump heater kit
230 V ~
Only use genuine GEA spare parts!

7.4 Accessories

Available accessories can be found on the Internet at www.gea.com

7.5 Extract from the lubricants table

The oil type filled as standard in the factory is marked on the name plate . This oil type should be
D
used as a preference. Alternatives are stated in the extract from our lubricants table below.
GB
Refrigerants
F
HFC
E
(e.g. R134a, R407C)
I
Ru
HCFC (e.g. R22)

7.6 Decommissioning

Close the shut-off valves on the compressor. Drain the refrigerant (it must not be discharged into the
environment) and dispose of it according to the regulations. When the compressor is depressurised,
undo the fastening screws of the shut-off valves. Remove the compressor using an appropriate hoist.
Dispose of the oil inside in accordance with the applicable national regulations.
26
725-4 (S)
Ref. No.
GEA standard oil types
Fuchs Reniso Triton SE 55
Fuchs Reniso SP 46
830-4 (S)
Ref. No.
08961
08851
08384
08426
Recommended alternatives
Fuchs Reniso Triton SEZ 32
Esso/Mobil EAL Arctic 46
Sunoco Suniso SL 46
Texaco Capella HFC 55
Fuchs Reniso SP 32
BP Energol LPT 46
Sunoco Suniso 3,5 GS
Texaco Capella WF 46
925-4 (S)
Ref. No.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg5/725-4 sHgx5/725-4Hgx5/725-4 sHg5/830-4Hg5/830-4 sHgx5/830-4 ... Show all

Table of Contents