Advertisement
Servicing
If, having followed these instructions
carefully, your machine fails to work
properly, contact your local Zanussi
Service Network. Before you do that,
though, it is worth making a few simple
checks yourself.
If the machine won't start...
Ensure that the programme control dial
on the machine is pulled out into the
«on» position.
Make sure that the lid of the machine is
firmly shut.
Make sure that the appliance is properly
plugged in and that the socket switch (if
any) is in the «on» position.
Check that there is power at the sod^et
by plugging in an appliance you know to
be working — a small lamp, for example.
If this too fails to work, check the main
circuit fuses in your home's consumer
unit or main fuse box.
If the machine won't fill...
Make sure the supply hoses are not
sharply bent.
Make sure taps and stop-cocks are
turned on.
Check that there is sufficient water
pressure.
If the machine won't drain or spin...
Check that the drain hose is not bent,
blocked, or obstructed in some other
way.
Check that the drain filter in the
machine is not clogged.
If the machine empties as it fills...
Make sure the end of the drain hose is
not less than 60 cm (23in) above floor
level.
If the machine vibrates badly, or is too
noisy...
Check that the machine is absolutely
level.
Check that there is sufficient clearance
between the machine and nearby wall,
furniture, etc.
Check that all the internal packing,
plastic spacers and transit security bolts
have been removed as described at the
start of these instructions.
Failure to observe these checks could
result in your being chaiged for the
service call when requested.
26
Advertisement
