Table of Contents
Advertisement
Before contacting your local Service Force Centre, check your machine against the simple
maintenance guidelines given below.
Problem
The appliance does not start up
The machine does not fill
The machine empties as it fills
The machine does not drain or spin
The machine leaks or overflows
The machine vibrates or is noisy
i
RATING PLATE
If, after above checks, there is still a fault, call
your Local Service Centre.
Please, make sure you give the purchasing date
and the Model, Product number (Prod.No...) and
Serial number (Ser. No...) of the appliance.
(These data will be found in the adhesive card
behind the door of clothes charging).
SERVICING
Check if the door is closed properly.
•
•
Check if the appliance is plugged in.
Check the fuse.
•
•
Check if the program dial is in the correct
position.
Check if the water tap is on.
•
•
Check if the tap is clogged.
Check if the inlet hose is bent.
•
•
Check if the water inlet filter is clogged.
•
The end of the drain hose is too low (see
page. 35)
Check if the drain hose is bent or squashed.
•
•
Check if the drain filter is clogged.
Check if the selected program includes
•
spinning.
Check if the 'Rinse Hold' botton is pressed.
•
•
Re-load the laundry loosely
•
Too much washing powder.
Unsuitable washing powder.
•
•
Check the joints for leaks. It is rather difficult
to see the water running along a hose.
Check if all transport devices have been
•
removed.
Check if the appliance touches the walls or
•
furniture.
Check if the legs are adequately levelled
•
and the nuts tight.
Possible solution
Rating plate
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
31
Advertisement
Table of Contents
