CONTENTS For the user For the installer Safety instructions Technical information Description of the appliance Installation Use of your appliance Unpacking Operating instructions Installation Programme chart 10/11 Levelling Hints & Tips 12-14 Moving of the appliance Cleaning and maintenance Water connection If something doesn't work 16/17 Electrical connection...
SAFETY INSTRUCTIONS You must read the whole of this instruction book Small and delicate objects (e.g. baby socks, before you use the appliance. Follow the advice stockings) can be easily washed inside a small carefully. Keep the book for future reference. If pillowcase with a zip fastener or in larger you sell or give away the appliance, make sure socks.
Page 4
Safeties Lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after the end of the programme.
DESCRIPTION OF THE APPLIANCE Programme selector Control panel Pushbuttons Handle for opening lid Lever for castors Trap door for lint filter Detergent dispenser Symbols ( ) Washing powder for programmes with pre-wash (1). ( ) Washing powder or liquid detergent for the main wash (2).
USE OF YOUR APPLIANCE The control panel Never turn the programme selector when the appliance is working. TL 653 C 5 Programme selector 1 ON/OFF pushbutton " " It enables to select the most adapted programme Press the ON/OFF pushbutton, the programme to the nature and degreees of soil of your laundry.
OPERATING INSTRUCTIONS 1. Place the laundry in the drum lift up the lid of the machine. open the drum with your two hands by pressing the button A and the two flapdoors till they disengage. introduce the laundry into the drum ; close the drum and the lid of the machine.
6. Select the programme Choose the programme according to the nature and the degree of soil of the laundry. Turn the programme selector clockwise to select the chosen programme. 7. Starting of the programme The ON/OFF pushbutton " " enables to switch on your machine.
PROGRAMMES CHART Programmes for cotton/linen Maximum load : 5 kg (cotton) Programmes Temperatures Detergent Water Time description (°C) dispensers consumption in minutes to use in liters White with prewash White Coloured ( ) Delicate coloured Rinsings (4) Spinning (*) If the laundry can withstand the bleaching treatment. When the selected programme is over, the washing machine stops automatically.
Page 10
Programmes for synthetics/delicates/wool Maximum loads : 2,5 kg (synthetics), 1 kg (wool). Programmes Temperatures Detergent Water Time description (°C) dispensers consumption in minutes to use in liters Synthetics with prewash Synthetics Synthetics short Delicate Wool Rinsings (3) Rinsing Short spinning Drain When the selected programme is over, the washing machine stops automatically.
HINTS AND TIPS Resistant white and coloured synthetics can Washing hints normally be washed at 60°C but also in this case You are advised not to leave your laundry too 40°C is sufficient if the laundry is not excessively long, especially when damp. Damp laundry dirty.
To remove paint stains, for example, use a vola- Liquid detergents tile substance such as turpentine: in this case, Using the new automatic dispenser for liquid you should wait for it to dry completely before detergents, it is possible to use a liquid detergent washing.
Wash code symbols These symbols appear on fabric label, in order to help you choose the best way to treat your laundry. Strong wash Max. wash Max. wash Max. wash Max. wash temperature 30°C WASH temperature 95°C temperature 60°C temperature 40°C Do not Hand wash...
CLEANING AND MAINTENANCE Make sure that the machine is unplugged and the water tap turned off before undertaking any kind of maintenance. Bodywork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning.
IF SOMETHING DOESN'T WORK ? Problems Problems Problems Problems Problems Solutions Solutions Solutions Solutions Solutions The wash results are not as usual The wash results are not as usual The wash results are not as usual The wash results are not as usual The wash results are not as usual Check that : was the wrong quantity or the wrong detergent...
Page 16
IF SOMETHING DOESN'T WORK (continue) Problem Problem Problem Problem Problem Solutions Solutions Solutions Solutions Solutions The machine vibrates or is too noisy Check that : all the transit bolts and packing have been removed. all the feet resting firmly on the ground, the lock nuts have been secured.
SERVICE If you have unable to identify or solve the problem, consult our servicing depar tment. Before telephoning, make a note of the make, model and date of purchase of your machine : the service department will require this information. Data plate You will find these informations on the data plate of the appliance.
FOR THE INSTALLER Technical information Dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm Power supply voltage / frequency 230 V / 50 Hz Total power absorbed 2300 W (10 A) Heater rating 1950 W Water pressure minimum...
Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaranteed.
Water connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar. If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before connecting the machine.