Table of Contents
Advertisement
16. Detach the Door Columns (x2) and the Door
Beam. Fold each one along the score lines to form
the column-like components and glue together.
17. Detach your preferred door.
Then, glue the columns and beam around the door.
18. Detach the Column Covers (x2) and glue them
to the door columns.
19. Glue the door columns to the inside of the building.
Ensure that the door beam is touching the underside
roof (so that the door is approx. 1mm short of the
bottom of the wall).
20. Detach the Floor, fold it along the crease line and glue
together.
Advertisement
Table of Contents
Need help?
Do you have a question about the ATD023 and is the answer not in the manual?
Questions and answers