atd models ATD023 Instruction Manual page 4

10. Apply glue to the underside of the roof kerb.
Then, insert the roof inside the building and
bond it to the roof kerb.
11. Detach Packer D (x4). Fold
each one along the score line
and glue together.
14. Glue Kerb D into postion.
The top of the component should be flush with the roof.
i
15. Detach the Roof Cap and glue it to the top
of the roof kerb.
12. Form Roof Kerb D.
Glue 3 x Packer B together.
Repeat.
13. Detach Kerb D Wrap (x2).
Apply glue to both sides of
1 x Kerb D, then apply the
wrap. Repeat.