Table of Contents
Advertisement
Switch LEDs
UID LED
Locator LED
Global Status
Overall status of the product
Indicator LED
OOBM Status
Status of OOBM Link
Indicator LED
connectivity
* Press the Mode Select button to switch between PoE, Spd, or Stk Mode.
Table 8: Rear Panel LED Behavior
Switch LEDs
Fan health LED
Status of fan
UID LED
Locator LED
PSU Status
Status of power supply
Indicator LED
LED mode select button and indicator LEDs
Function
Off
On/Flash Blue (for
30 min)
Flash - Green
On - Green
Flash - Amber
On - Amber
Snoring (Dim -
Bright periodically)
Off
Half Bright - Green
On - Green
Activity Flicker -
Green
Function
On - Green
Slow flash - Amber
Off
On/Flash (30 min) -
blue
On Green
Off
Slow Flash - Green
State
User configured the located
LED : OFF
User configured the locator
LED: On/Flash
Self-test in progress during
UBOOT and SVOS
Successfully booted AOS-CX
Recoverable faults (e.g. fans,
PSU fault)
Critical faults (e.g. exceed
temperature limit)
System is in hibernation
OOBM port is not connected, no
link established
OOBM port is enabled and
established link with partner
Experiencing high bandwidth
utilization
% of the time that the LED light
up is roughly proportional to
the % of full bandwidth
utilization of the port
State/Mode
Normal
Fan fault
User configured the locator
LED : OFF
User configured the locator
LED: On/Flash
Normal
No power, PSU has invalid AC
or DC input or invalid DC output
Power supply has faulted
Meaning
Meaning
Introducing the switches |
17
Advertisement
Table of Contents
