Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual
Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Presario 1200 series
Hide thumbs Also See for 1200US - Presario - Celeron 800 MHz:
Table of Contents

Advertisement

|
Home Page
Illustrated Parts Catalog
Notice
Preface
Product
Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Procedures
Specifications
Connector Pin
Assignments
Battery Pack
Operations
Maintenance & Service Guide
Presario 1200 Series
Models: 1230 and 1232
|
Notice
|
Preface
|
Removal & Replacement Procedures
Pin Assignments
Welcome to the Maintenance & Service Guide (MSG). This online guide is
designed to serve the needs of those whose job it is to repair Compaq products.
Many of the components of the hardcopy MSG are contained in this online
guide. The Notice, contains the copyright and trademark information. The
Preface
shows symbol conventions, Technician Notes and Serial Number
locations on the unit.
This MSG will be periodically maintained and updated online as needed.
To report a technical problem, contact your Regional Support Center or IM Help
Center
|
Product Description
|
Battery Pack Operations
|
Troubleshooting
|
Specifications

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1200US - Presario - Celeron 800 MHz and is the answer not in the manual?

Questions and answers

Summary of Contents for Compaq 1200US - Presario - Celeron 800 MHz

  • Page 1 Welcome to the Maintenance & Service Guide (MSG). This online guide is designed to serve the needs of those whose job it is to repair Compaq products. Many of the components of the hardcopy MSG are contained in this online guide.
  • Page 2 OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. Ó 1998 Compaq Computer Corporation.
  • Page 3: Technician Notes

    Technician Notes WARNING: Only authorized technicians trained by Compaq should repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module level repair. Because of the complexity of the individual boards and subassemblies, the user should not attempt to make repairs at the component level or to make modifications to any printed circuit board. Improper repairs can create a safety hazard.
  • Page 4 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Product Description Compaq Models and Presario Features Portable Controls and Computer is Lights Left Side continuation Components of the new...
  • Page 5: Troubleshooting

    Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Troubleshooting This section covers troubleshooting information for the Preliminary Steps Compaq Presario 1200 Series Portable Computers. The Clearing the Power-On basic steps in troubleshooting include: Password Power-On Self Test 1. Follow the Preliminary Steps.
  • Page 6 Specifications Pin Assignments Battery Pack Operations Illustrated Parts Catalog This section provides an breakdown and identifies the spare parts System Unit ordering number associated with each item(s) for the Compaq Presario Boards 1200 Series Portable Computers. Display Assembly Mass Storage...
  • Page 7: Removal And Replacement Procedures

    Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Report the computer serial number to Compaq when Heatspreader requesting information or ordering spare parts. Keyboard Processor Hard Drives CD Drive Battery Charger Board Modem...
  • Page 8: Physical And Environmental

    Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Specifications This chapter covers the following specifications of Compaq Presario 1200 Series Portable Computers: Computer models Physical and environmental System Interrupts System DMA System I/O Address...
  • Page 9: Connector Pin Assignments

    Specifications Pin Assignments Battery Pack Operations Connector Pin Assignments This appendix provides connector pin assignment tables for Compaq Presario 1200 Series Portable Computers. For more information on connectors, refer to the section Rear Connectors. NOTE: The signals in all tables of this appendix are considered active high unless otherwise indicated by an asterisk (*).
  • Page 10 2:50 hr Disposal of a Used Battery Pack In the interest of safeguarding our environment. Compaq Computer Corporation recommends that nickel metal hydride (NiMH) and lithium ion (Li ion) battery packs be recycled. Battery packs should be handled in accordance with country, state, province, or local regulations.
  • Page 11: Models And Features

    Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Models and Features Models and Compaq Presario 1200 Features Series Portable Computer Models Controls and Model Model Lights 1230 1232 Left Side Display 12.
  • Page 12 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Controls and Lights Models and Front of Unit Features Controls and 7.
  • Page 13: Left Side Components

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Left Side Components Models and 1. PC Features Card Diskette Eject Drive...
  • Page 14: Right Side Components

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Right Side Components 1. Battery 3. CD Drive Models and Features Compartment Eject Button...
  • Page 15 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Bottom of Unit Models and 1. Memory 2. Feet Features Compartment Controls and...
  • Page 16 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Rear Connectors Models and 1. AC Adapter 6. USB Features 2.
  • Page 17: Power Management Settings

    You can select Sleep mode instead of turning off the computer when you have finished using it. This allows the computer to wake up faster than turning it completely off and saves power over the active (On) mode. Compaq Presario Notebook computers have two levels of sleep, Hibernation and Sleep.
  • Page 18 You can select power conservation settings through Power Management located on the System Features menu in Computer Setup. Computer Setup can be accessed by pressing F10 when the Compaq logo appears on the screen. These settings control the power conservation rate and the timeout values for various system components.
  • Page 19: Preliminary Steps

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Preliminary Steps Before running POST, complete the following preliminary steps: 1.
  • Page 20 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Power-On Self Test (POST) Running POST To run POST, complete the following steps: Turn off the computer, then turn on the computer.
  • Page 21 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Clearing the Power-on Password Clearing the power-on password requires removing all Setup attributes that are programmed in the...
  • Page 22: Compaq Diagnostics

    Battery Pack Operations Compaq Diagnostics Compaq Diagnostics is installed on the hard drive of the computer. Run the Diagnostics utilities when you want to view or test system information and if you have installed or connected devices. If you run Compaq Diagnostics from a diskette, ensure that it is version 10.11 or later.
  • Page 23: Shipping Preparation

    Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Contacting Compaq Support Obtain the following information before contacting Compaq Reseller Support: Product name Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred...
  • Page 24: Diagnostic Error Codes

    Battery Pack Operations Diagnostic Error Codes Diagnostic error codes occur if the system recognizes a problem while running the Compaq Diagnostic program. These error codes help identify possibly defective subassemblies. The following tables list error codes, a description of the error condition, and the action required to resolve the error condition.
  • Page 25: Troubleshooting Without Diagnostics

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Troubleshooting Without Diagnostics This section provides information about how to identify and correct some common hardware, memory, and software problems.
  • Page 26: Solving Minor Problems

    Not enough space is left Use another diskette. on the diskette. Drive error has occurred. Run Computer Checkup from the Compaq Diagnostics diskette. Diskette is not formatted. Format the diskette. At the system prompt, enter FORMAT A: Diskette drive cannot read a...
  • Page 27: Solving Pc Card Problems

    Card or card driver is not Contact your Compaq supported. authorized service provider for a list of PC Cards tested successfully in Compaq PC Card platforms. PC Card modem, fax, or Card is not fully inserted into Ensure the card is inserted network card does not work.
  • Page 28: System Unit

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations System Unit System Unit Description Spare Part Boards Number Display Assembly Keyboard...
  • Page 29: Table Of Contents

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Boards System Unit Description Spare Boards Part Number Display Assembly 1.Heatspreader 330961-...
  • Page 30 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Description Spare Part System Unit Number Boards Display Display 330939- Assembly Assembly...
  • Page 31: Mass Storage Devices

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Mass Storage Devices System Unit Description Spare Boards Part Number Display Assembly...
  • Page 32: Miscellaneous Cables Kit

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Miscellaneous Cables Kit Miscellaneous Cables Kit System Unit Spare Part Number: Boards 330946-001 Display...
  • Page 33: Maintenance & Service Guide

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations System Unit Power Cords Boards Description Spare Part Number Display Assembly Power Cord...
  • Page 34 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Miscellaneous Hardware and Plastics Kit System Unit Miscellaneous Hardware and Plastics Kit Spare Part Number: 330949-001 Boards Display...
  • Page 35: Miscellaneous Parts

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Miscellaneous Parts System Unit Description Spare Part Number Boards AC Adapter 298239-001 Display...
  • Page 36 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Documentation and Software Description Spare Part Number System Unit Quick Restore CD, Belgium* Windows 98 346862-381...
  • Page 37: Presario 1200 Series Models: 1230 And 1232

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Electrostatic Discharge A sudden discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry.
  • Page 38: Home Page

    Screws The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations.
  • Page 39: Cables And Connectors

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Cables and Connectors Most cables used throughout the unit are ribbon cables. Cables must be handled with extreme care to avoid damage.
  • Page 40: Zif Connectors

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations ZIF Connectors The computer uses a zero insertion force (ZIF) connector for the keyboard cable to the system board.
  • Page 41 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations The ribbon cable position for the 2.1-GB or 3.2 hard drive.
  • Page 42 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations The ribbon cable position for the CD drive. Back to Cables and Connectors.
  • Page 43 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations The ribbon cable position for the diskette drive. Back to Cables and Connectors.
  • Page 44 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations The cable position for the speaker assembly. Cables and Connectors.
  • Page 45: Heatspreader 330961

    Processor compartment. To prevent damage, do not allow metal objects to touch the battery contacts. Place Hard Drives only the battery pack for the Compaq Presario 1200 CD Drive Series Portable Computers into the battery Battery compartment. Do not force the battery pack into the bay if insertion does not occur easily.
  • Page 46: Removing The Battery Pack

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Battery Pack To remove Electrostatic the battery Discharge pack, Service...
  • Page 47 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 2. Pull forward on the battery pack tab and remove the battery pack from the chassis.
  • Page 48 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Palmrest Cover with Touch Pad The palmrest Electrostatic cover with touch Discharge...
  • Page 49 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 4. Turn the computer over (right side up), pull forward on the display latches to release and open the display...
  • Page 50 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Heatspreader To remove Electrostatic heatspreader, Discharge complete the Service following Considerations...
  • Page 51: Removing The Keyboard

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Keyboard To remove Electrostatic Discharge keyboard, Service complete the Considerations following...
  • Page 52 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 5. Turn the keyboard over allowing it to rest on top of the palmrest cover with touchpad slot opening.
  • Page 53: System 330938

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Processor To remove Electrostatic processor, Discharge complete the Service following steps:...
  • Page 54: Home Page | Notice | Preface|Notice | Preface

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations To replace the processor complete the following steps: The notch on the left corner of the processor serves as an orientation indicator.
  • Page 55 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the 3.2-GB or 2.1-GB Hard Drives To remove Electrostatic the hard Discharge...
  • Page 56: Pin Assignments

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 5. Disconnect the hard drive data cable from the hard drive and remove from the chassis.
  • Page 57 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations To remove the hard drive mounting bracket, complete the following steps.
  • Page 58: Boards

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the CD Drive To remove Electrostatic the CD drive, Discharge complete the Service...
  • Page 59: Maintenance & Service Guide

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Map Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 6. Open the CD drive tray using a small paper clip. Next Step...
  • Page 60 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 7. Disconnect the CD drive cable from the CD drive and remove the CD drive from the chassis.
  • Page 61 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Battery Charger Board To remove the battery charger board, complete the following steps:...
  • Page 62: Removing The Modem

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Modem To remove Electrostatic the modem, Discharge complete the Service following...
  • Page 63 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 6. Disconnect the modem cable from the modem. To replace the modem, reverse the previous procedures.
  • Page 64 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Display Panel Assembly To remove the display Electrostatic panel assembly, Discharge...
  • Page 65 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 7. Disconnect the flex cable attached to the display panel assembly from the ZIF connector on the system board.
  • Page 66 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 8. Disconnect the backlight cable attached to the display panel assembly from the connector on the system board.
  • Page 67 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 9. Support the back of the display panel assembly and remove two screws from each of the display panel hinges.
  • Page 68 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 10. Gently pull the flex cable attached to the display panel assembly through the slot on the Upper CPU cover and...
  • Page 69 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Upper CPU Cover To remove the Upper CPU cover complete the following...
  • Page 70: Removing The Speaker Assembly

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Speaker Assembly To remove the speaker assembly, complete the following steps:...
  • Page 71: Board

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Diskette Drive To remove the diskette drive, complete the following steps: Prepare the...
  • Page 72 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 8. Disconnect the diskette drive data cable from the system board.
  • Page 73 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Fan Assembly To remove the fan assembly, complete the following steps:...
  • Page 74 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations To remove the fan gasket, complete the following step: Pull the gasket from the fan.
  • Page 75: Removing The System Board

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the System Board Electrostatic Discharge Service To remove the system board, complete the following steps: Considerations Cables and 1.
  • Page 76 15. Remove three standoffs from the system board. Next Step...
  • Page 77 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 16. Remove two screws from the CD Drive mounting rails and remove the mounting rails from the system board.
  • Page 78 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 17. Remove three screws from the system board. Next Step...
  • Page 79 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 18. Pull the PCMCIA eject lever out (straight), lift up the right side of the system board and pull forward to remove the system board from the chassis.
  • Page 80: Removing The Memory Module

    Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations Removing the Memory Module To remove Electrostatic the memory Discharge module, Service...
  • Page 81 Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations 4. Pull side levers to release the memory module and unplug the memory module from the system board.

Table of Contents