Table of Contents
Advertisement
Digital media board
Description
Digital media board
Before removing the digital media board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
a.
b.
c.
d.
e.
f.
g.
Remove the microphone:
Turn the system board upside down, with the audio connectors toward you.
1.
Remove the three Phillips PM2.0×4.0 screws (1) that secure the digital media board to the system
2.
board.
Downloaded from LpManual.com Manuals
Battery on page
Hard drive (see
Hard drive on page
Optical drive (see
Optical drive on page
Switch cover and keyboard (see
Display assembly (see
Display assembly on page
Top cover (see
Top cover on page
Fan (see
Fan on page
58)
System board (see
System board on page
34).
37)
44)
Switch cover and keyboard on page
50)
55)
60)
Component replacement procedures
Spare part number
462402-001
46)
67
Advertisement
Table of Contents
