Table of Contents
Advertisement
Remove the WLAN module (4) by pulling the module away from the slot at an angle.
5.
NOTE:
Reverse this procedure to install the WLAN module.
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel and optical drive bracket.
Description
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
Optical Drive Bezel/Bracket Kit (includes optical drive bezel and optical drive bracket and screws)
Before removing the optical drive, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the optical drive:
Position the computer with the left side toward you.
1.
Remove the Phillips PM2.5×9.0 screw (1) that secures the optical drive to the computer.
2.
Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive disc tray is
3.
partially ejected from the optical drive.)
44
Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
WLAN modules are designed with a notch (5) to prevent incorrect installation.
Battery on page
34).
Spare part number
462336-001
462335-001
462334-001
Advertisement
Table of Contents
