Removing The Memory Module - Compaq Presario 1200XL series Maintenance & Service Manual

Removing the Memory Module

To remove the memory module, complete the following steps:
1. Prepare the Notebook for disassembly
2. Close the display and turn the Notebook upside down.
3. Remove the screw from the memory compartment.
4. With the front of the Notebook facing you, slide the door to the left and lift.
1
5. Pull the side levers to release the memory module and lift
the system board.
To replace the memory module, reverse these procedures.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1200XL Series
Model XL300, XL300A, and XL300B
(pg
S G 1200XL S
ERVICE UIDE ERIES
9).
2
it off the connector on
R S
EMOVAL EQUENCE
13