Tile Mapping; Language; System Setting - Colorlight X2s User Manual

3.3.7 Tile Mapping

Rotate the knob and select Tile Mapping to enter the Tile Mapping submenu. In the
submenu, press the knob/OK to set the sender as the connection source. Then select Set
by Port to enter the submenu, in which you can choose the Ethernet port from 1 to 4 that
needs setting mapping, and set the row offset value(X) and column offset value(Y) of the
port, and the width, height, row number, column number and link type of the corresponding
cabinets. Finally select Save to save the mapping.

3.3.8 Language

In the Language menu, you can switch languages.

3.3.9 System Setting

In the System Setting menu, you can restore factory settings and view the detailed
information of the current version.
17