Table of Contents
Advertisement
4.4
Meter Compatibility
The LoRa Module is compatible with Sensus PolluStat and PolluTherm F meters with a compatible firmware ver-
sion. If the LoRa Module is mounted in an incompatible meter, this is indicated in the OTC App. Table 2 shows the
minimum firmware versions required.
The meter's firmware version can be shown in the meter's display, for further information please refer to the me-
ter's manual.
Meter
Meter
PolluStat
PolluStat
PolluTherm F
PolluTherm F
5
Getting started
5.1
Purpose
This chapter provides instructions on how to get started with the LoRa Module. After reading and carefully follow-
ing each step of this chapter, your meter connectivity module should be mounted and connected to the LoRaWAN
network.
5.2
Product specification
(1)
Green LED
(2)
Red LED
(3)
Interface Connector
(4)
Push Button
(5)
Pulse Input
(6)
LoRaWAN Antenna
Note: The NFC antenna is integrated in the edge
of the PCB.
Minimum firmware version
Minimum firmware version
1.03/0.14
1.00/0.05
Table 2: LoRa Module - Meter firmware compatibility
Figure 1: LoRa Module Product Specification
5
Advertisement
Table of Contents
