Advertisement
Quick Links
Advertisement
Related Manuals for Creality CR-Laser Falcon
Summary of Contents for Creality CR-Laser Falcon
- Page 1 CR-Laser Falcon User Manual V1.0 SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.
- Page 2 Dear Consumers: Thank you for choosing our products.For the best experience,please read the instructions before operating the machine. Our teams always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem . For a better experience in using our product, you can also learn how to use the engraving machine in the following ways: View the accompanied instructions and videos in the TF card.
- Page 3 Firmware Upgrade Security Statement For the purpose of engraving or cutting with a laser engraving machine, allow the workpiece to be exposed to the high-density laser beam emitted by the laser engraving machine. The workpiece may be the machine breakdown and environmental contamination. 3.
- Page 4 the machine unattended while it is running； 13. Users should comply with the laws and regulations of the corresponding countries and regions where violators' legal liability under any circustance.
- Page 5 Model Net weight Operation system Output Range of operating temperature Laser source Laser wave length Laser power Safety class Laser engraving software Type of supporting materials...
- Page 9 CR-Laser Falcon User Manual CR-Laser Falcon V1.0 SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.
- Page 10 Y-axis assembly.
- Page 11 ：Lock with eight M5*20 screws. Assemble three tripods and control box assembly： Tighten the belt and lock the belt with hexagon screw.
- Page 12 5.1. 5.2. Please place the with the surface of the processed material when it is and the processed material.Follow the tips and naturally vertical downward.Then lock it with two make the bottom of the laser module contact with clockwise until it is attracted by the magnet.Finally focus bar.Finally lock it with two hand screws on the plug in the laser module cord.
- Page 13 Please follow the assembly directions to focus correctly and wipe the protective lens of the laser module with dustless cloth and alcohol to ensure the best engraving effect. powering on, connect the machine with the supplied power adapter and power cord. Finally turn on the red switch on the left side of the control box.
- Page 14 Press the microswitch, it enters preview mode from standby mode, the laser head will emit weak light, and repeat movement around the time, adjust the material to a suitable position. strong light, the machine will start engraving with indicator light on. light turns into breathing light.
- Page 15 Solution: Please move the machine to its original position and press microswitch on the machine control...
- Page 17 Start Place a metal protective plate Import a picture and engraving material Adjust the focal length Set parameters of the laser module Use the Type-C data cable to connect the Frame-preview computer and the engraving machine Power on Start engraving Select the corresponding COM port to connect the machine...
-
Page 18: Warranty
WARRANTY Before returning the product and filling in a warranty, please contact after-sale person for going through after-sale formality.And attach this warranty card along with the returned machine. Malfuction And Damage Depiction Or Return Date of purchase Day Mon. Year... - Page 19 Users should abide by the laws and regulations of the country and region where the equipment is located (place of use), abide by professional ethics, and pay attention to safety obligations. It is strictly forbidden to use our products or equipment for any illegal purpose.Our company is not responsible for the relevant legal responsibilities that the violator should bear.
Need help?
Do you have a question about the CR-Laser Falcon and is the answer not in the manual?
Questions and answers
Laser Falcon 10 w **** um die Parameter für die Einstellung auf deutsch
For the Creality CR-Laser Falcon 10W, the engraving and cutting parameters are as follows:
- Material: White tile
- Software: LightBurn
- Mode: Jarvis
- Auxiliary Tool: Black ink
- Power: 90%
- Speed: Measured in mm/min (exact speed not provided)
These settings are specific to engraving a souvenir pet photo on a white tile. Adjustments may be needed for other materials or applications.
This answer is automatically generated