ENTER/EXIT PROGRAMMING MODE
Industrial 2 of 5 Check Character Transmission
Enables/disables transmission of an Industrial 2 of 5 check character.
$CU2CT00
Industrial 2 of 5 Check Character Transmission
Industrial 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding for the
Industrial 2 of 5 symbology.
Variable Length:
Fixed Length:
$CU2LC00
Industrial 2 of 5 Length Control = Fixed Length
174
GRYPHON™ I GD/GBT/GM4500
= Send
For variable-length decoding, a minimum length may be set.
For fixed-length decoding, two different lengths may be set.
Industrial 2 of 5 Check Character Transmission
= Don't Send
$CU2CT01
Industrial 2 of 5 Length Control = Variable Length
$CU2LC01
1D SYMBOLOGIES