Compressed 2 Of 5 Set Length 1; Compressed 2 Of 5 Set Length 2 - Datalogic GRYPHON GD4500 Product Reference Manual

General purpose handheld area imager bar code reader
Hide thumbs Also See for GRYPHON GD4500:
Table of Contents

Advertisement

COMPRESSED 2 OF 5

Compressed 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for "
on page 168
first fixed length if in Fixed Length Mode. The length includes the bar code's check and
data characters.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select Compressed 2 of 5 Length 1 Setting
$CC2L1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Compressed 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for "
on page 168
second fixed length if in Fixed Length Mode. The length includes the bar code's check
and data characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Compressed 2 of 5 Set Length 2 Setting
$CC2L2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
. Length 1 is the minimum label length if in Variable Length Mode, or the
Length 1 = 01 (one character)
. Length 2 is the maximum label length if in Variable Length Mode, or the
Length 2 = 50 (50 characters)
ENTER/EXIT PROGRAMMING MODE
Compressed 2 of 5 Length Control"
Set Length 1" on page 297
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
Compressed 2 of 5 Length Control"
Set Length 2" on page 298
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
PRODUCT REFERENCE GUIDE
for more
represent-
for more detailed pro-
represent-
169

Advertisement

Table of Contents
loading

Table of Contents