Table of Contents
Advertisement
13 DISPLAY SET
I DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
I OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
Control range: +5 (downward) to –5 (upward)
Initial setting: 0
Press + to lower the position of the OSD.
Press – to raise the position of the OSD.
I GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there's no video signal input.
Nothing is displayed on the screen including the on-
screen display if OFF is selected.
Choices: AUTO, OFF
Initial setting: AUTO
Note
• If "GRAY BACK" is set to OFF, no information will be
displayed on the screen when video signals are not being input.
I V CONV. (Video conversion)
Use this feature to turn on/off the function to convert
composite signals to S-video signals to output through the
S-video jack when no S-video signals are input.
Choices: ON, OFF
Initial setting: OFF
OFF
Select this not to convert composite signals to S-video
signals.
ON
Select this to convert composite signals to S-video
signals.
14 MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other settings on this unit.
Choices: ON, OFF
Initial setting: OFF
Select ON to protect the following features:
• DSP program parameters
• All SET MENU items
• Center, rear speakers, rear center, and subwoofer levels
• The on-screen display (OSD) mode
Notes
• When "14 MEMORY GUARD" is set to ON, you cannot use
the test tone.
• When "14 MEMORY GUARD" is set to ON, you cannot select
any other SET MENU items.
SET MENU
67
Hide quick links:
Advertisement
Table of Contents
