Max Volume; Adaptive Drc - Yamaha HTR-6260 Owner's Manual

2 Display
You can set items for a monitor or the front panel display.
■
Dimmer
Adjustable range: -4 to 0*
Sets brightness of the front panel display. As the value is
lowered, the brightness of the front panel display is
darkened.
Note
• The brightness of display does not become bright in Pure Direct mode
even if the value is increased.
■ FL Scroll
Continue*/Once
Choices:
Selects the way to scroll the screen when a total number of
characters exceed a display area of the front panel display.
Continue
Repeatedly displays all characters by
scrolling.
Once
Displays all characters by scrolling once,
halts scrolling, and then displays first 14
characters.
■
OSD Shift
Adjustable range: -5 to 0* to +5
Adjusts top and bottom positions of the screen displayed
on the video monitor. To move up the screen, set this value
larger. To move down the screen, set it smaller.
3 Volume
You can set items for volumes.
■

Adaptive DRC

Auto/Off*
Choices:
Adjust the dynamic range in conjunction with the volume
level. This feature is useful when you are listening at
lower volumes or at night. When this function is enabled,
the dynamic range is adjusted as follows.
If the VOLUME setting is low: the dynamic range is
If the VOLUME setting is high: the dynamic range is wide
Auto
Off
Input level
VOLUME: low
Auto
Adjusts the dynamic range automatically.
Off
Not adjust the dynamic range automatically.
y
• The Adaptive DRC setting is effective for headphones.
narrow
Auto
Off
Input level
VOLUME: high
Operating various settings for this unit (Setup menu)
■

Max Volume

Adjustable range: -30.0dB to +15.0dB/+16.5dB* (5.0 dB
step)
Sets the maximum volume level so that the volume will
not be accidentally increased. For example, you can adjust
the volume between –80.0 dB and –5.0 dB when you set
this parameter to "–5.0dB." The volume increases to the
maximum level when this parameter is set to +16.5 dB
(default).
■ Init. Volume
Off*/Mute/-80.0dB to +16.5dB (0.5 dB step)
Choices:
Sets the volume at the time this unit is turned on. When
this parameter is set to "Off," the volume is set to a level
that last time this unit is set to standby.
Note
• If the setting of "Max Volume" is lower than the setting of "Init.
Volume," the setting of "Max Volume" becomes effective. For example,
when you set "Max Volume" to "–30.0dB" and "Init. Volume" to
"0.0dB," the volume is automatically set to "–30.0dB" at the next time
this unit is turned on.
4 Input Rename
Changes input source names to be displayed on the front
panel display.
You can select an input source that you want to change the
name to be displayed using oCursor.
Selecting a name to be displayed from templates
Select an input source that you want to change the name,
and select a name from the following templates using
Cursor.
– Blu-ray – Satellite
– DVD – VCR
– SetTopBox – Tape
– Game – MD
– TV – PC
– DVR – iPod
– CD – HD DVD
– CD-R – "blank"
y
• If you change the display name of an input source to your original one
and select the input source, the current input source name and the
template name are displayed. This is convenient if you want to cancel
name change operation.
Entering an original name
Select an input source that you want to name, and press
oENTER. You can enter up to 9 characters by selecting
one character at a time with the following keys according
to the following operation.
oCursor l / h
For selecting characters that you
want to change
oCursor k / n
For selecting characters to be
entered
oENTER
For entering the selected characters
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
55
En