Zone2 Set; Audio Delay; Max Volume; Tone Control - Yamaha AVENTAGE RX-A1060 Owner's Manual

Hide thumbs Also See for AVENTAGE RX-A1060:
Table of Contents

Advertisement

Zone2 Set

Configures the Zone2 settings.
Volume
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable volume
adjustments for Zone2.
Settings
Fixed
Disables volume adjustments for Zone2 output.
Variable
Enables volume adjustments for Zone2 output.
X
This setting is not available depending on the "Power Amp Assign" setting.

Max Volume

Sets the Zone2 limit value of the volumes.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
X
This setting is available only when "Volume" is set to "Variable".
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
Settings
Off
Sets the level at the volume level of the unit when it last entered standby mode.
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments).
On
(This setting works only when the initial volume is set lower than "Max Volume".)
X
This setting is available only when "Volume" is set to "Variable".

Audio Delay

Adjusts the Zone2 audio output timing so that the audio is synchronized with the video.
Setting range
0 ms to 100 ms (1 ms increments)
Mono
Switches between stereo and monaural for Zone2 output.
Settings
Off
Produces stereo sounds in Zone2.
On
Produces monaural sounds in Zone2.
Enhancer
Enables/disables Compressed Music Enhancer (p.65) for Zone2 output.
Settings
Off
Disables Compressed Music Enhancer.
On
Enables Compressed Music Enhancer.

Tone Control

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2
output.
X
You can also adjust the "Treble" and "Bass" settings for Zone2 output with the front panel controls (p.89).
Settings
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
Auto
automatically.
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
Manual
manually (-6.0 to +6.0 dB, 0.5 dB increments).
Does not adjust the level of high-frequency range (Treble) and low-frequency
Bypass
range (Bass).
124
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-v1081Rx-a1060

Table of Contents