Dsp Parameter; Memory Guard - Yamaha HTR-6260 Owner's Manual

Operating various settings for this unit (Setup menu)
5 Zone2
Sets the maximum volume level and initial volume level
of Zone2.
y
• This item is displayed only when "Extra SP Assign" is set to "Zone2."
■ Max Volume
Adjustable range: -30.0dB to +15.0dB / +16.5dB*
(5.0 dB step)
Sets the maximum volume level of Zone2, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to "–5.0dB."
■
Init. Volume
Off*/Mute/-80.0dB to +16.5dB (0.5 dB step)
Choices:
Use this feature to set the volume level of Zone2 when the
power of Zone2 unit is turned on.
Note
• If the setting of "Max Volume" is lower than the setting of "Init.
Volume," the setting of "Max Volume" becomes effective. For example,
when you set "Max Volume" to "–30.0dB" and "Init. Volume" to
"0.0dB," the volume is automatically set to "–30.0dB" at the next time
this unit is turned on.
56
En

DSP Parameter

You can set parameters for the sound field programs. For
details, see page 46.

Memory Guard

Off*/On
Choices:
Protects settings of setup menu against accidental
alteration.
Off
Not protect settings.
On
Protects the settings of the setup menu
(except for the Memory Guard setting).
Note
• When this parameter is switched to "On," "G" appears while the setup
menu is displayed on the video monitor.