Max Volume; Initial Volume; Autopowerstdby (Auto Power Standby); Eco Mode - Yamaha r-n602 Owner's Manual

Configuring various functions (Setup menu)

Max Volume

Sets the maximum volume to prevent excessive loudness.
Setting range
-30 dB to +15.0 dB / +16.5 dB (5 dB step)
Default
+16.5 dB

Initial Volume

Sets the initial volume when the receiver is turned on.
Setting range
Off, Mute, -80.0 dB to +16.5 dB (0.5 dB Step)
Default
Off
AutoPowerStdby
(Auto Power Standby)
Enables/disables the auto-standby function. If you do not
operate the unit for the specified time, the unit will
automatically go into standby mode.
Does not set the unit to standby mode
Off
automatically.
(Default)
Sets the unit to standby mode automatically.
While NET, BLUETOOTH or USB is selected as
the input source, the unit will switch to standby
mode if the selected source is not played back for
On
20 minutes.
For all input sources, the unit will switch to
standby mode if it is not operated for 8 hours.
y
Just before the unit enters standby mode, "AutoPowerStdby"
appears and then countdown starts in the front display.

ECO Mode

Enables/disables the eco (power saving) mode. When the
eco mode is enabled, you can reduce the unit's power
consumption.
The new setting will take effect after the unit is restarted.
Be sure to press ENTER to restart the unit after selecting a
setting.
Disables the eco mode.
Off (default)
Enables the eco mode.
On
Note
When "ECO Mode" is set to "On", the front display may become
dark.
48
En