Function Setup; Audio Output; Hdmi Auto; Auto Delay - Yamaha HTR-6260 Owner's Manual

Operating various settings for this unit (Setup menu)
Max
Outputs sound without adjusting the
dynamic range of the input signals.
■ 2 Lipsync
Adjusts delay between video output and audio output.

HDMI Auto

Off*/On
Choices:
Automatically adjusts output timing of audio and video
signals when a monitor that supports an automatic lip-
sync function is connected to this unit.
Off
Select this when the connected monitor does
not support the automatic lip-sync function or
you do not use the automatic lip-sync
function. Set the correction time in "Manual
Delay."
On
Select this when the connected monitor
supports the automatic lip-sync function. Fine
adjust the correction time in "Auto Delay."

Auto Delay

Adjustable range: 0* to 240ms (1 ms step)
Fine adjust the correction time when "HDMI Auto" is set
to "On." The actual correction time is displayed under in
"Auto Delay" field and an offset time set by the user in
"Offset" field.

Manual Delay

Adjustable range: 0* to 240ms (1 ms step)
Manually fine adjusts the correction time. Select this when
the connected monitor does not support the automatic lip-
sync function or you set "HDMI Auto" to "Off."

Function Setup

You can set various items for HDMI and display.
1 HDMI
You can set items for HDMI.
■

Standby Through

On/Off*
Choices:
Selects on or off of output of HDMI signals input from the
HDMI IN jack to the HDMI OUT jack when this unit is on
standby. When this parameter is set to "On" signals input
from the HDMI 1-4 jacks can be output to a monitor
component.
On
Outputs the HDMI signals to the HDMI OUT
jack.
Off
Not output the HDMI signals to the HDMI
OUT jack.
y
• To enables pass-through output, any one of the input sources connected
to the HDMI1-4 must be selected before switching to standby.
• When "Standby Through" turns on, the HDMI THROUGH indicator on
the front panel display lights up. While the indicator lights up, it
consumes 1 to 3W of power depending on a condition of an HDMI signal
passing through this unit.
54
En
■

Audio Output

Choices: Amp*/TV/Amp+TV
Selects this unit or a component connected to this unit via
the HDMI OUT jack of this unit for reproducing sound
signals input from the HDMI IN jack.
Amp
Outputs HDMI sound signals form the
speakers connected to this unit.
TV
Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Amp+TV
Outputs HDMI sound signals from the
speakers connected to this unit and the
speakers of a TV connected to this unit.
Note
• When "TV" or "Amp+TV" is selected, signal formats of audio and visual
signals output from this unit to the monitor vary depending on
specifications of the monitor.
■ Resolution
Through*/480p/720p/1080i/1080p
Choices:
Upscales the resolution of HDMI output that is converted
from analog video input signals and output from the
HDMI OUT jack.
Notes
• Resolution of the HDMI output converted from 720p or 1080i analog
video signals cannot be upscaled.
• When a video monitor is connected to this unit via the HDMI jack, this
unit automatically detects a resolution that the monitor supports. An
asterisk (*) appears on the left of the detected resolution.
• If this unit cannot detect the resolution that the monitor supports, set
"MON.CHK" in the advanced setup menu to "SKIP" (see page 60) and
try it again.
■ Aspect
Thrgh*/16:9/Smart
Choices:
Set a horizontal to vertical ratio (aspect ratio) of images
reproduced by HDMI signals output from the HDMI OUT
jack when the HDMI signals are converted from analog
video input signals by a video conversion function.
Thrgh
Outputs the video signals without changing
the aspect ratio.
16:9
Outputs the video signals that displays 4:3
images on a 16:9 monitor with black bands
on the right and left sides of the monitor
screen.
Smart
Outputs the video signals that displays 4:3
images on a 16:9 monitor by stretching right
and left of images to fit on the monitor
screen.
Notes
• You cannot change the aspect ratio of the screen when "Resolution" is set
to "Thrgh."
• The setting is not effective for inputs with the aspect ratio other than 4:3.
• You cannot obtain an effect of the aspect ratio when visual signals are
input from the HDMI IN jack or 720p, 1080i or 1080p signals are input.