Yamaha HTR-6260 Owner's Manual page 40

SIRIUS Satellite Radio™ tuning (U.S.A. model only)
2
Search for a channel by using one of the
SIRIUS Satellite Radio search modes.
• To select a channel from the all channel list, see
"All Channel Search mode" on this page.
• To select a channel by category, see "Category
Search mode" on this page.
• To select the desired channel directly by entering
the channel number, see "Direct number access
mode" on this page.
• To select a channel from the preset channels, see
"Calling a preset channel (Preset Search mode)"
(page 37).
y
• You can display the SIRIUS Satellite Radio information on the
front panel display or in the video monitor (see page 39).
• If you tune into a channel that you do not subscribe, "CALL
SIRIUS on the front panel display" or "CALL 888-539-SIRIUS
TO SUBSCRIBE on the OSD" appears.
• You can set the SIRIUS Satellite Radio preset channels (see
page 37).
■
All Channel Search mode
Press ITUNING/CH l / h (or iTUN./CH k /
n) repeatedly to search for a channel within all
channels.
SIRIUS
001 Hits 1
y
• You can search for a channel quickly by pressing and holding
ITUNING/CH l / h (or iTUN./CH k / n).
• You can skip channels to the previous or next category by pressing
HCATEGORY l / h (or iCATEGORY l / h).
■
Category Search mode
1
Press HCATEGORY l / h (or
iCATEGORY l / h) to select the channel
category.
"CAT" is displayed on the front panel display during
channel category selection. When you select the
category, the first channel in the category is selected.
Category
The first channel in the category
search mode
SIRIUS
Pop
Category name
Note
• If you don't operate within 10 seconds, the category search mode
returns to "ALL (All Channel Search)."
2
While "CAT" is displayed on the front panel
display, press ITUNING/CH l / h (or
iTUN./CH k / n) repeatedly to search for a
channel within the selected channel
category.
36
En
y
• You can search for a channel quickly by pressing and holding
ITUNING/CH l / h (or iTUN./CH k / n).
Note
• This unit skips the channels when this unit is in the All Channel
Search mode or Category Search mode in the following cases (it is
not malfunction of this unit):
– the channel is locked (see page 38).
– the channel is out of service.
– you do not subscribe to the channel.
■
Direct number access mode
Press the tNumeric keys to enter the desired
three-digit channel number.
For example, to enter the number 123, press the
tNumeric keys as "1," "2" and "3."
y
• To display the Sirius ID number displayed on the front panel display,
select channel "0."
• To enter a one-digit or two-digit channel number, press the tNumeric
keys on the remote control and then press tENT to confirm the input
number.
• Instead of pressing tENT to tune into the channel immediately, you
can wait a few seconds until this unit confirms the entered channel
number.
• If no key is pressed within a few seconds after you enter a one-digit or
two-digit number, this unit automatically confirms the entered channel
number.
• If the selected channel is locked, "PIN:___" appears on the front panel
display. Enter the four-digit Parental Lock code number by using the
tNumeric keys or press tENT to cancel (see page 38).
• If the selected channel is not available, an advisory message may appear.
For details, see "SIRIUS Satellite Radio" on page 66.
• If you operate tNumeric keys in preset search mode (see next
page), a preset number is selected. If you want to directly select a channel
number, press ITUNING/CH l / h (or iTUN./CH k / n) to
switch to All Channel Search mode and enter the number.