Table of Contents
Advertisement
4
Typhoon Operating Instructions 28-9623-56 AA
a)
Type a name for the scan in the File name box. Typhoon Scanner Control
software creates an image file and stores it using the Data File (.gel) type.
b)
Optional: Change folder location of the file. Default folder is the data folder.
Note: Saving the scanned data to a folder located on a removable media disk
drive can cause a loss of data. It is recommended to use a folder on the
computer hard drive. Move the image file to the removable media after
scanning is completed.
c)
Click Save to start the scan.
d)
Before the Typhoon instrument begins the scan, an initialization process
occurs. Depending on the state of the instrument and the scan parameters
you selected in Scanner Control, the initialization can take as long as 5
minutes. A timer displays the time estimated for initialization. The timer counts
down as the initialization proceeds.
Monitoring the scan progress.
After you start the scan, the ImageQuant Preview window appears, and the green
Scan indicator light on the top of the instrument blinks.
•
To abort the scan, click Cancel Scan in the Scan in Progress window.
A message appears asking if the data file should be deleted.
Operation 4
Performing a scanning 4.4
51
Advertisement
Table of Contents
