GE Typhoon 9200 Operating Instructions Manual page 45

4 Operation
4.4 Performing a scanning
5
Set scan parameters
M
Figure 4-1. Typhoon Scanner Control window. Letters refer to specific steps in instruction below.
1
2
3
44
Scanning
The Scanning state message appears while the instrument is scanning.
F
Enter desired User name in the Setup area (Fig 4-1, A).
Select desired scan acquisition mode in the Acquisition Mode list (Fig 4-1, B).
• Storage Phosphor to select Storage phosphor scan acquisition mode.
• Fluorescence to select fluorescence scan acquisition mode.
• Chemiluminescence to select chemiluminescence scan acquisition mode.
Select parameters for fluorecsent and chemiluminescent scanning by clicking
Setup button (Fig 4-1, C).
A
B C
D
E
G H
I
J
K
L
Typhoon Operating Instructions 28-9623-56 AA