Table of Contents
Advertisement
Parker Automation Controller
PAC120
4.5.6 Communication Modules
Connector
X21
X22
4.5.7 Functional Earth
Connect functional earth to the protective earth conductor of the switching cabinet or the system that the PC is in-
stalled in. Use the flat plug (6.3 mm x 0.8 mm) or the earth bolt at the back of the unit.
Verify that the cross section is not less than 2.5 mm
NOTE
A low-impedance earth conductor improves the dissipation of interference received via external power supply cables, signal ca-
bles or cables of peripheral units.
4.5.8 SD Card
PAC120 features a SD card slot at its front. The slot is marked with a SD icon.
The SD card slot has a push-in/push-out plug & eject mechanism. You may use a flat object to help you plug in or
eject the card.
The SD card can be found under the following path: \media\sd
SD card properties
•
Supported format(s): FAT32
•
Maximum memory size: 32 GB
•
Maximum file size: 4 GB - 1 byte
•
Quality: Industrial Grade
•
Technology: SLC
CAUTION
Electrostatic discharge (ESD)
Inappropriate handling will destroy the memory card
SD cards are susceptible to electrostatic discharge (ESD). Please take account of the instructions on how to handle memory
à
cards.
NOTE
The SD card slot has no hot-plug capability. It will therefore detect cards only if they were plugged in at the time of booting the unit.
You cannot swap SD cards in service.
22
Profinet
Port-001
Port-002
2
. Try to keep the lead to the cabinet terminal as short as possible.
EtherCAT
IN
OUT
Product Description
Ethernet
Port 1
Port 2
Advertisement
Table of Contents
