3. Install the speakers.
4. Install the
system
board.
5. Install the
integrated heat sink
6. Install the
M.2 2230 solid-state drive
7. Install the
wireless
card.
8. Install the
memory
module.
9. Install the
media-card
10. Install the
system-board
11. Install the
hard
drive.
12. Install the
I/O
cover.
13. Install the
back
cover.
14. Install the stand.
15. Follow the procedure in
Display panel
Removing the display panel
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
I/O
cover.
5. Remove the
hard
drive.
6. Remove the
system-board
7. Remove the
memory
module.
8. Remove the
wireless
card.
9. Remove the
M.2 2230 solid-state drive
10. Remove the
integrated heat sink
11. Remove the
system
board.
About this task
The following image indicates the location of the display panel and provides a visual representation of the removal procedure.
or
discrete heat
or
M.2 2280 solid-state
reader.
shield.
After working inside your
Before working inside your
shield.
or,
M.2 2280 solid-state
or,
discrete heat
sink.
drive, as applicable.
computer.
computer.
drive, which ever applicable.
sink.
Removing and installing Field Replaceable Units (FRUs)
91