Table of Contents
Advertisement
Steps
1. Align the screw holes on the base panel with the screw holes on the display-assembly base.
2. Replace the 21 screws (M3x5) that secures the base panel to the display-assembly base.
Next steps
1. Install the
display
panel.
2. Install the
system
board.
3. Install the microphones.
4. Install the camera.
5. Install the
power-button
6. Install the
solid-state
7. Install the speakers.
8. Install the
wireless
card.
9. Install the antennas.
10. Install the
heat
sink.
11. Install the fan.
12. Install the
memory
modules.
13. Install the
system-board
14. Install the
hard
drive.
15. Install the stand.
16. Install the
bottom
cover.
17. Install the
back
cover.
18. Follow the procedure in
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in
52
Removing and installing components
board.
drive.
shield.
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
