Table of Contents
Advertisement
Figure 57. system board connector location
Next steps
1. Replace the following:
a.
Trusted Platform Module (TPM)
NOTE:
The TPM must be replaced only while installing a new system board.
NOTE:
The TPM plug-in module is attached to the system board and cannot be removed. A replacement TPM
plug-in module is provided for all system board replacements, where a TPM plug-in module was installed.
b.
Memory modules
c.
Processor
d.
Heat sink module
e.
Internal USB card, if installed
f.
Expansion
cards, if installed
2. Replace the iDRAC MAC address label from the system with the new iDRAC MAC address label that came with the
replacement system board.
3. Reconnect all cables to the system board.
Installing and removing system components
65
Advertisement
Table of Contents
