Table of Contents
Advertisement
16.
Return lever [7d].
17.
Open lever [7f] on the left downward.
18.
Clean behind lever [7f].
■Cleaning Roller (Lever [7f])
(1)
Wipe the roller surface with the soft cloth tightly wrung out of water.
■Cleaning Paper Dust (Lever [7f])
Note
Non-woven dry type fabric can be used effectively for cleaning paper dust.
(1)
Lightly wipe paper dust off on the surface of the paper
path.
Note
• This area is wide to wipe off. Be sure to confirm if there is no
unwiped point.
• The areas in the dotted line frame are specially easy to collect
paper dust. Be sure to confirm if there is no unwiped point.
19.
Return lever [7f].
20.
Open lever [7g] on the rear left under the Fusing
Unit downward.
Note
Before opening lever [7g], make sure lever [7f] is closed. Lever
[7g] cannot be opened as far as lever [7f] is open.
64
Printer Unit Manual
7f
Paper path surface
Roller
7g
Advertisement
Table of Contents
