Sharp BP-1200S Manual page 67

5. Close the left side cover of the paper path by holding the handle.
6. Locate the handle on the right side cover of the
paper path, which is on the upper right of the
Cooling Unit. Then, move the handle up to the upper
right and clean behind the cover.
Note
• The handle is on the far side of the cover.
• Because the cover cannot stay at a fixed position, keep holding it
up with one hand during the cleaning.
■Cleaning Roller (the right side cover of the paper path)
(1) Wipe the roller surface with the soft cloth tightly wrung out of water.
■Cleaning Paper Dust(the right side cover of the paper path)
Note
Non-woven dry type fabric can be used effectively for cleaning paper dust.
(1) Lightly wipe paper dust off on the surface of the paper
path.
Note
The areas in the dotted line frame are specially easy to collect
paper dust. Be sure to confirm if there is no unwiped point.
7. Close the right side cover of the paper path by holding the handle.
8. Open lever [6c] on the front right side to the right.
9. Clean behind lever [6c].
Roller
Paper path surface
6c
Paper path surface
Roller
67
Maintenance