Table of Contents
Advertisement
Paper Jams in Paper Ejector
Note
In the case of a jam of long paper, error lamps and Fault Details Window may show you an indication that is
different from actual paper jam condition. Therefore, you need to perform actions to clear paper jams at every
device that may have jammed paper remained.
1.
Wait until the purge function has automatically moved paper on the way from the printer
unit to the optional units.
Note
Do not open any cover of the optional units before the movement has been completed.
2.
If the jammed paper is lying across more than one unit, open every cover of all devices
that are located before the paper jam area.
3.
Open each lever located on the paper path.
• Interface Decurler Module...1c
• Inserter...1a, 1d
• Static Eliminator...1a
• High Capacity Stacker...entry: 1b; exit: 3b
• Crease / Two-sided Trimmer...entry: 1a; exit: 1d
• Folder Unit...2a
• Finisher...1a
4.
Remove the jammed paper from each device.
Cut the jammed paper sheet with scissors or a cutter as required before you can remove the cut
sheets.
Refer
Removing jammed paper on each device
'Optional Units Manual' / 'Print Inspection System Operation Guide'.
42
Printer Unit Manual
1b
1b
1a/1d
1c
1a
3b
3b
1a
2a
1d
1a
Advertisement
Table of Contents
