Care And Maintenance - BorMann PRO BPW3130 Instruction Manual

EN
When transporting in vehicles
• Switch the product off and disconnect it from the water and power supply.
• Pull out the telescopic handle until it audibly snaps into place.
• Tilt the product towards you until it balances on the wheels. Then move it by its telescopic handle.
• Protect the product from any heavy impact or strong vibrations which may occur during transportation
in vehicles.
• Secure the appliance against shifting and tipping over.
STORAGE
CAUTION
Risk of personal injury or damage! Consider the weight of the appliance when storing it.
Storing the appliance
• Park the machine on an even surface.
• Detach spray wand from the trigger gun.
• Push the disconnect button on the trigger gun and pull the high-pressure hose out of the trigger gun.
• Place the trigger gun, brushes into the storage place.
• Put both spray wand and nozzles into the storage place
• Coil the high-pressure hose and hang it over the hose storage.
• Store the mains connection in the accessory compartment.
• Prior to extended storage periods, as during the winter, also observe the instructions in the care section.
• Always store the pressure cleaner, parts, and accessories in a place that is inaccessible to children. The ideal storage temperature is between 10 °C and 30°C.
Store the appliance indoors to prevent the water in the unit from expanding under freezing conditions.
• It is recommended to use the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
Frost protection
ATTENTION
Appliance and accessories that are not completely drained can be destroyed by frost.
Completely drain appliance and accessories and protect them against frost. To avoid damage:
• Detach the appliance from the water supply.
• Detach spray lance from the trigger gun.
• Turn on the appliance power switch
• Push the lever of the trigger gun until no more water is escaping.
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
• Turn off the appliance power switch.
• Store the appliance and the entire accessories in a frost-free room.

CARE AND MAINTENANCE

DANGER
Risk of electric shock!
Prior to all work on the appliance, switch off and unplug the appliance.
High pressure hose
The high-pressure hose is specially constructed with reinforced walls it can be easily damaged and should be stored carefully.
• Do not kink.
• Do not drive vehicles over the hose.
• Do not expose the hose to sharp edges or corners. Misuse will lead to ballooning or premature failure.
Clean the sieve in the water connection and nozzle
Clean the sieve in the water connection regularly.
Remove coupling from the water connection, and rinse with warm water to prevent any foreign matter from clogging the pump.
Clean the nozzle, remove any dirt from the nozzle hole and rinse.
• The sieve must not be damaged.
• Pull the sieve out using flat pliers.
• Clean the sieve under running water.
• Reinsert the sieve into the water connection.
8
WWW.NIKOLAOUTOOLS.COM
Telescopic handle lock