Table of Contents
Advertisement
Search for Outdoor Sensor
If you are seeing "NO" or dashes for your outdoor readings, please try the
following steps:
1. Hold the
TEMP
Indicator
2. If after 3 minutes the sensor still isn't connected, bring the sensor inside,
install fresh batteries, then hold the
to restart the station.
3. If your outdoor data is still not appearing after these steps, please
contact our support staff. For additional help visit:
Care & Maintenance
When batteries of different brand or type are used together, or new and old batteries are
used together, some batteries may be over-discharged due to a difference of voltage or
capacity. This can result in venting, leakage, and rupture and may cause personal injury.
•
Do not mix Alkaline, Lithium, Standard, or Rechargeable battteries.
•
Always purchase the correct size and grade of battery most suitable for the intended
use.
•
Always replace the whole set of batteries at one time, taking care not to mix old and
new ones, or batteries of different types.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries are installed correctly with regard to polarity (+ and -).
•
Remove batteries from product during periods of non-use. Battery leakage can cause
corrosion and damage to this product.
•
Remove used batteries promptly.
•
For recycling and disposal of batteries, and to protect the environment, please check
the internet or your local phone directory for local recycling centers and/or follow local
government regulations.
button to search for your outdoor sensor. The Reception
will begin to animate.
ALERTS
and
LIGHT
button together
bit.ly/basic_restart
12
Advertisement
Table of Contents
