Active Temperature Alert/Turn Alert Off; Temperature/Humidity Trend Indicators; Search For Outdoor Sensor - La Crosse Technology S88785 Instruction Manual

1. Press the DISPLAY button to select the Indoor or Outdoor
page.
2. Hold the ALERT button for 3-5 seconds
3. The low temperature alert value will flash.
4. Press the ▼ or ▲ buttons to adjust the low alert values.
5. Press the ALERT button to confirm & move to activate the
alert.
6. Press the ▼ or ▲ buttons to turn the low alert ON/OFF.
7. Press the ALERT button to confirm & move to the high temperature alert. The high
alert will flash.
8. Press the ▼ or ▲ buttons to adjust the values.
9. Press the ALERT button to confirm & move to activate the alert.
10.Press the ▼ or ▲ buttons to turn the high alert ON/OFF.
11.Press the ALERT button to confirm & exit alert settings.
Press the ALERT button to exit, or wait 20 seconds without pressing buttons to return to
normal time display.
 Active alert emits a series of beeps once per minute with a flashing yellow
alert ON icon.
Turn Alert Off:
 Hold the ALERT button for 3-5 seconds. The low alert value will flash.
 Press the ALERT button until the flashing yellow alert ON icon is selected.
 Press the ▼ or ▲ buttons to turn the alert OFF.
Note: Change the value of the alert higher/lower if desired and leave the alert ON.
The indoor and outdoor temperature/humidity trend indicators will update every 30
minutes or less. These trends represent temperature changes over the past three hours.
Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At
1:30pm, the arrow will indicate the temperature change since 10:30am.
 Temperature has risen in the past 3 hours.
 Humidity has risen in the past 3 hours.
 Temperature has not changed in the past 3 hours.
 Humidity has not changed in the past 3 hours.
 Temperature has fallen in the past 3 hours.
 Humidity has fallen in the past 3 hours.
 Hold the ▲ button to search for the outdoor sensor.
 The temperature reading will show dashes until reconnected.
 Open the outdoor sensor and press the TX button to send a signal.
Model: S88785

Active Temperature Alert/Turn Alert OFF

Temperature/Humidity Trend indicators

Search for Outdoor Sensor

www.lacrossetechnology.com/support Page | 10