Arm/Disarm Temperature Alerts; Temperature Alert Sounds; Search For Outdoor Sensor - La Crosse Technology 308-1425B Instruction Manual

INDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert

value, and press the ALERT button to confirm. Then press the ALERT
button again switch to INDOOR LOW setting.
INDOOR LOW alert will flash. Press the ▼ or ▲ buttons to choose the

value, and press the ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn
individual alerts ON or OFF.

ARM/DISARM TEMPERATURE ALERTS

In normal time mode, press and release the ALERT button to toggle

between:
Outdoor HI
o
Outdoor Lo
o
Indoor HI
o
Indoor LO
o
Press the ▲ button to arm the selected alert.

The alert bell appears when each alarm is activated.

Press the ▼ button to disarm the selected alert.

OFF will show in the Alerts area if no alert is active.

When temperature alert sounds, the corresponding alert bell will flash.

The alert beeps once every minute, until the temperature is out of alert

range.
Press any button to stop alert. The alert bell will still show.

Disarm Alert: In normal mode, hold and release the ALERT button to

select the alert to disarm. With HI or LO alert selected, press the ▼ button
disarm alert.
Hold the HEAT/DEW button to search for the outdoor sensor.
•
The strength signal icon will animate until the sensor signal is received
•
or for 3 minutes if no signal available.
Model: 308-1425B

TEMPERATURE ALERT SOUNDS

SEARCH FOR OUTDOOR SENSOR

www.lacrossetechnology.com/support
pg. 9