Table of Contents BASICS TEMPERATURE/HUMIDITY APPENDIX Power Up Temperature & Humidity Care & Maintenance Icons Atomic Time Specifications 13-14 Settings Menu History Records Stay In Touch Adjustable Backlight Heat Index and Dew Point We’re Here to Help Customizable Alerts Auto-Dim Settings Warranty &...
Watch our sensor mounting video: bit.ly/th_sensor_mounting Outdoor Sensor Weather Station TX147TH M73170 Atomic Time • Your station will automatically search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00. •...
Settings Menu Hold the SET/ATOMIC button until the display changes to enter the Settings Menu. Press and release the buttons to adjust values. Press and release the SET/ATOMIC button to confirm values and move to the next setting. Press and release the LIGHT button at any time to save and exit.
Adjustable Backlight LIGHT • Press and release the button to adjust the backlight intensity. • There are 4 brightness levels, plus an off option. Auto-Dim Settings Program your display to automatically dim during preselected times. Hold the LIGHT button until the display changes to enter the Auto-Dim Settings Menu.
Forecast Icons • The forecast icons use the station’s internal barometer to predict conditions to come within the next 12 hours. • For the most accurate forecasts, allow 7-10 days for station calibration. • The Snow Icon will show when temperatures are below 32°F (0°C) and rain or storms are predicted.
Forecast Animation When a sunny or clear forecast is predicted, you will see: Animated Birds between 7:00am-6:59pm or Animated Stars from 7:00pm-6:59am. The animation will be in 3 stages and last for 2 seconds each then repeat. Animation Sequence Birds 7:00am to 6:59pm with sunny forecast. Stars 7:00pm to 6:59am with clear nighttime forecast.
Pressure Pressure History Graph • Read from left to right, the Pressure History Graph indicates the rise and fall in air pressure over the past 36 hours. • The “0Hr” on the horizontal axis indicates the current hour, thus the current air pressure also.
Moon Phase The moon phase is based on the Lunar Calendar and the year, month, and date New Moon Small Waxing Large Waxing First Small Waxing Large Waxing Crescent Crescent Quarter Gibbous Gibbous settings. Moon Phase will show from 7:00pm to 6:59am regardless of the Full Large Waning Small Waning...
History Records From normal time display, press and release the TEMP button to toggle through indoor/outdoor temperature and humidity records with time and date stamps. Records Viewing Order • Outdoor High Temperature • Outdoor Low Temperature • Outdoor High Humidity •...
Customizable Alerts Setting Custom Alerts Hold the ALERTS button until the display changes to enter the Alert Settings Menu. Press and release the buttons to activate/deactivate and adjust alerts settings. Press ALERTS to confirm your selection. Your programmed alerts are active when the and / icon appear on the LCD.
Search for Outdoor Sensor If you are seeing “NO” or dashes for your outdoor readings, please try the following steps: 1. Hold the TEMP button to search for your outdoor sensor. The Reception Indicator will begin to animate. 2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside, install fresh batteries, then hold the ALERTS LIGHT...
Specifications Weather Station (M73170) Temperature Range: 32ºF to 122ºF (0ºC to 50ºC) Humidity Range: 10% - 99% RH Relative Pressure Range: 23.62 to 32.48 inHg (800 to 1100 hPa) Power Requirements: 5-volt power adapter (included) GPU280500150WAOO The plug on the power adapter is intended to serve as the disconnect device, the socket- outlet shall be installed near the equipment and shall be easily accessible.
Stay in Touch! Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram. We’re Here to Help If you require additional assistance, get in touch with our friendly customer support team based in La Crosse, WI.
Warranty & Patents La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty...
DOUBLE YOUR WARRANTY Scan Here Scan the QR Code or visit: bit.ly/m73170_register to register your product and double the standard 1-year warranty for free by opting to recieve occasional product emails.