Removing The Front Or Rear End Cap - Emerson FB1200 Quick Start Manual

FB1200 Flow Computer Quick Start Guide
D301786X012
November 2023

Removing the Front or Rear End Cap

The flow computer includes two threaded end caps (covers). The front end cap includes
a window for viewing the HMI module, while the rear end cap provides access to the
terminal plate for power and I/O wiring.
EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing end
cap(s) in a hazardous location could result in an explosion.
1.
2. Unscrew the end cap turning it counter-clockwise until the end cap comes off. Set
it aside in a safe location.
4
DANGER
Remove the retaining clamp (if present). Grasp the end cap (front or rear).
Note
If you need more leverage to open or close an end cap than you can get with
your hand, you can place a long screwdriver or other appropriate tool across
the two notches in the end cap to act as a pry bar:
Front End Cap Removing Front End Cap