ICON Health & Fitness NordicTrack EXP10i User Manual page 9

4. Identify the Left and Right Base Covers (90, 89).
Slide the Left Base Cover onto the Left Upright
(84), and slide the Right Base Cover onto the
Right Upright (85).
Next, have a second person hold the handrail
assembly (D) near the Left and Right Uprights
(84, 85). Remove the two ties (Q) securing the
Handrail Wire (83) and the Upright Wire (82).
Do not pinch the Wires (82, 83). Using
the included socket tool, attach the handrail
assembly with four 3/8" x 2 1/4" Screws (2)
and four 3/8" Star Washers (6); start all four
Screws, and then tighten them.
5. Connect the Handrail Wire (83) to the Upright
Wire (82). IMPORTANT: The wire connectors
should slide together easily and snap into
place with an audible click. If they do not,
turn one connector and try again. You must
connect the wires properly for your treadmill
to function properly.
Then, insert the wire connectors and the excess
wire into the Right Upright (85).
4
2
6
90
84
5
83
82
85
9
D
2
6
Q
83
82
Q
89
85