Table of Contents
Advertisement
Quick Links
www.nordictrack.com
Model No. NTL01909.1
Serial No.
Write the serial number in the space
above for reference.
Serial Number Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT CON-
TACT THE STORE; please contact
Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
1-888-825-2588
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness NordicTrack Elite 9500 PRO
Summary of Contents for ICON Health & Fitness NordicTrack Elite 9500 PRO
- Page 1 www.nordictrack.com USER'S MANUAL Model No. NTL01909.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 21. Do not attempt to raise, lower, or move the 29. Do not store the television in temperatures treadmill until it is properly assembled. (See below -40° F (-40° C) or above 140° F (60° C). ASSEMBLY on page 7, and HOW TO FOLD Do not operate the television in temperatures AND MOVE THE TREADMILL on page 29.) You below 23°...
- Page 5 34. Upon completion of any service or repairs to • Use a jumper wire not smaller than No. 6 the treadmill or the television, ask the service AWG (13.3 mm ) copper, or the equivalent technician to perform safety checks to con- when a separate antenna-grounding elec- firm that the unit is in proper operating condi- trode is used.
-
Page 6: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary NordicTrack ing this manual, please see the front cover of this man- ® ELITE 9500 PRO treadmill. The ELITE 9500 PRO ual. To help us assist you, note the product model treadmill offers an impressive selection of features de- number and serial number before contacting us. -
Page 7: Assembly
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. - Page 8 2. Identify the Right Upright (74), which is marked with a “Right” sticker. Hold the Right Upright near the Right Base Cover (77). See the inset drawing. Locate the wire tie in the rectangular hole in the lower end of the Right Upright. Tie the wire tie securely around the end of the Upright Wire Harness (75).
- Page 9 4. With the help of a second person, hold the con- sole assembly near the Uprights (73, 74). Console Assembly Connect the Upright Wire Harness (75) to the Console Wire Harness (71). See the inset draw- ing. The connectors should slide together easily and snap into place.
- Page 10 7. Slide the Right Upright Sleeve (96) up against the console assembly. Attach the Right Upright Sleeve with two #8 x 3/4" Tek Screws (29). Attach the Left Upright Sleeve (not shown) to Console the console assembly in the same way. Assembly 8.
- Page 11 9. With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (83) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward.
- Page 12 Before operating the television, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm ter- minal or the audio/video wire harness to the audio/video input jacks. No CATV cable, antenna, or adapter is included. HOW TO CONNECT AN ANTENNA Note: Due to an FCC requirement, analog signals will no longer be broadcast over the air after June 12, Place an indoor an-...
-
Page 13: How To Use The Chest Pulse Sensor
HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR the chest pulse sensor is not dried after each use, it may remain activated longer than necessary, drain- The chest pulse sensor consists of two components: ing the battery prematurely. -
Page 14: Operation And Adjustment
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with high- performance lubricant. - Page 15 CONSOLE DIAGRAM FEATURES OF THE CONSOLE run with the Marathon workout. iFit workouts automati- cally control the treadmill while the voice of a personal The treadmill console offers an impressive array of trainer coaches you and motivates you through every features designed to make your workouts more effec- step of your workout.
- Page 16 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
- Page 17 5. Follow your progress with the displays. console will not display your heart rate accu- rately. See page 13 for information about the chest The matrix—When you pulse sensor. select the manual mode, the matrix will Before using display a track that rep- the handgrip resents 1/4 mile (400 pulse sensor,...
- Page 18 HOW TO USE AN EVENT TRAINING WORKOUT To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- 1. Insert the key into the console. ton. The walking belt will begin to move at 1 mph. Adjust the speed of the walking belt as desired by See HOW TO TURN ON THE POWER on page 16.
- Page 19 HOW TO USE A PRESET WORKOUT represents the current segment of the workout. The height of the flashing segment indicates the 1. Insert the key into the console. speed setting for the current segment. At the end of each segment, a series of tones will sound and See HOW TO TURN ON THE POWER on page 16.
- Page 20 HOW TO CREATE A CUSTOM WORKOUT the first segment, simply adjust the speed and in- cline of the treadmill as desired by pressing the 1. Insert the key into the console. speed and incline buttons. See HOW TO TURN ON THE POWER on page 16. When the first segment of the workout ends, a se- ries of tones will sound and the current speed and 2.
- Page 21 HOW TO USE A CUSTOM WORKOUT If desired, you can redesign the workout while using it. To change the speed setting or the in- 1. Insert the key into the console. cline setting for the current segment, simply press the speed or incline buttons. When the cur- See HOW TO TURN ON THE POWER on page 16.
- Page 22 HOW TO USE AN IFIT CARD automatically adjust to the first speed and incline settings of the workout. Hold the handrails and To purchase iFit cards at any time, see the front cover begin walking. of this manual or go to www.iFit.com. iFit cards are also available at select stores.
- Page 23 HOW TO USE A HEART RATE WORKOUT buttons to change the maximum target heart rate setting (see EXERCISE INTENSITY on page 35). CAUTION: Note: If you change the maximum target heart rate setting, the intensity level of the entire workout will If you have heart prob- change.
- Page 24 If your pulse is not detected during the program, Your television can receive analog and digital sig- the letters “PLS” will flash in the display and the nals. For the television to operate properly, good speed and/or incline of the treadmill may automati- reception is necessary.
- Page 25 HOW TO OPERATE THE REMOTE CONTROL Press the EPG button to view the electronic program guide. Note: The electronic program guide is only The first time you use the re- available when viewing ATSC digital television. mote control, insert batteries (see HOW TO REPLACE THE Press the Info button to view information about the cur- BATTERIES IN THE REMOTE...
- Page 26 HOW TO ADJUST THE TELEVISION SETTINGS 4. Adjust the time settings. You must use your remote control to adjust television Adjust the OSD (on-screen display) duration, sleep settings. Press the Menu button to enter the main timer, time zone, or daylight saving time settings. menu or to return to a previous menu.
- Page 27 6. Scan and save channels. After all valid chan- nels available in your Select CATV or AIR. Select CATV to receive chan- area have been nels through the 75 ohm terminal on the treadmill. saved into the televi- Program Name Skip FD 3803 Select AIR to receive channels through an antenna.
- Page 28 THE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the consoleʼs track of the total distance that the walking belt has stereo sound system, you must connect your MP3 moved and the total number of hours that the treadmill player, CD player, or other personal audio player to the has been used.
-
Page 29: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. - Page 30 HOW TO LOWER THE TREADMILL FOR USE Frame 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame downward and release the latch knob. Note: To release the latch knob, it may be necessary to push the frame for- ward as you pull the latch knob to the left.
-
Page 31: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. - Page 32 Next, locate the Reed Switch (20) and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley View until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and 1/8 in.
- Page 33 PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level.
- Page 34 PROBLEM: The remote control does not function correctly SOLUTION: a. Make sure you are standing on the treadmill, holding the remote control near the television and pointing the remote control directly at the console. b. If your remote control is still not functioning correctly, the batteries should be replaced; most re- mote control problems are the result of low batteries.
-
Page 35: Exercise Guidelines
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning any time. During the first few minutes of exercise, your exercise program, consult your physician. body uses carbohydrate calories for energy. Only after This is especially important for persons over the first few minutes of exercise does your body begin age 35 or persons with pre-existing health... - Page 36 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
-
Page 37: Part List
PART LIST—Model No. NTL01909.1 R0110A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description Foot Rail Cover Right Rear Foot Foot Rail Rear Wheel #8 x 3/4" Track Screw TV Remote #8 x 3/4"... - Page 38 Key No. Qty. Description Key No. Qty. Description Latch Warning Decal Latch Cap AV Wire Nut Left Grip 5/32" Hex Key Right Grip Chest Pulse Strap 4" Ground Wire Split Washer Console TV Cable Incline/Controller Wire Speaker Cover Incline Stop Bracket Speaker Stop Bracket Spacer #6 x 1/2"...
-
Page 39: Exploded Drawing
EXPLODED DRAWING A—Model No. NTL01909.1 R0110A... - Page 40 EXPLODED DRAWING B—Model No. NTL01909.1 R0110A...
- Page 41 EXPLODED DRAWING C—Model No. NTL01909.1 R0110A...
- Page 42 EXPLODED DRAWING D—Model No. NTL01909.1 R0110A...
- Page 43 EXPLODED DRAWING E—Model No. NTL01909.1 R0110A...
-
Page 44: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the NordicTrack Elite 9500 PRO and is the answer not in the manual?
Questions and answers
Hello we purchased a treadmill from a private party 9500 elite. I can't get it to lower out of the upright position
To lower the NordicTrack Elite 9500 PRO treadmill from the upright position:
1. Hold the upper end of the treadmill with your right hand.
2. Pull the latch knob to the left and hold it.
3. Pivot the frame downward and release the latch knob. You may need to push the frame forward slightly to release the latch.
4. Hold the metal frame firmly with both hands and lower it to the floor.
- Do not grip only the plastic foot rails.
- Do not drop the frame.
- Bend your legs and keep your back straight to prevent injury.
This answer is automatically generated